PLA Marble 3D Printer Filament

Short Description:


1. [Marble Rough Surface] This filaments feature not just matte rock visualization, but also rock feel. Designed for aesthetic creation of statue themed prints, which can exhibit sharp details. Not suitable for functional scenario which needs very strong physical properties.

2. [No Nozzle Jamming]: Purity PLA filament raw materials and high precision diameter tolerance, 1.75mm +/-0.02mm. Strict control of uniform PLA filament diameter and selection of high-quality raw materials to avoid nozzle jamming caused by impurities and diameters. Easy handling, minimal deformation.

3. [Premium Quality 1.75MM Marble Filament]: Get smooth extrusion. Uniform winding of 3D printer filament free of getting tangle. PLA marble high toughness and strong layer adhesion leads to the perfect first printed layer.

4. [Dimensional Accuracy & Consistency] Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these Rock PLA filaments of 1.75 mm diameter, dimensional accuracy + / – .05 mm; 1 kg spool (2.2lbs)

5. [Recommend Temperature] Printed Temps 190-220°c. Platform Temp0-60°c. Match all 1.75 mm-specification 3d printers in the market except chipped filament cartridge.

Product Detail


[Marble Texture] (1)

[Marble Texture]

Added marble like additives. Suitable for marble like printing, such as decoration, furniture accessories, etc.

[Environmental Friendly]

Food grade environmental friendly material. Extracted from corn or other plants. Safe, odorless and degradable. No harm for health.

[Marble Texture] (2)
[Marble Texture] (3)

[High Compatibility]

Widely used in 3D printing. Suitable for 99.99% FMD/FFF 3D printers. Easy to form and good printing effect.

[Not Easy to Break]

 Good toughness, tensile strength and liquidity. Strict quality control for each batch. 100% no bubble.  Good printing effect without warping.

PLA Metallic Filament (4)
PETG solid (4)

[High Precision of Diameter]

 Tolerance of filament diameter is controlled within ± 0.02mm. Stable and even extrusion for high printing accuracy and quality.

  • Previous:
  • Next:

  • Diameter 1.75 ± 0.2mm
    Printing Temperature 175-200℃
    Heated Bed Temperature 50-80℃
    Density 1.25 ± 0.05 g/cm3
    Heat Deflection Temperature 50-60℃
    Melt Flow Rate 5-7 g/min (190℃ 2.16kg)
    Tensile Strength ≥ 60 Mpa
    Bending Strength ≥ 70 Mpa
    Elongation at Break ≥3.0%
    N.W. 1.0 kg
    G.W. 1.3 kg
    Length ≈ 330m
  • Write your message here and send it to us