ABS 3D Printer Filament

Short Description:


1. [Less Odor, Less Warping] TronHoo ABS filament is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. ABS is 3D printed at 220°C to 250°C , it is suggested to use a heated bed or an enclosed build space to control the cooling of this material and prevent warping.
2. [Smooth & Stable Printing]: TronHoo 3D promises no tangles, no bubbles and no clogs. Its performance is stable with smooth extrusion and excellent adhesion, without stringing and warping issues under optimal settings.
3. [High Resistant] ABS is a highly impact-resistant, heat-resistant filament that produces strong, attractive designs. A favorite for functional prototyping, ABS prints is great with an no need to polish.
4. [Dimensional Accuracy & Consistency] This 1.75mm diameter ABS filament has been made with strict production standards. There won’t have the problem of printing interruption caused by the knotting of the filament.
5. [Vacuum Packing] Complete drying for 24 hours before packaging. We use vacuum-sealed packaging bag for packaging 3d printer filament to keep the humidity percentage at a minimum and controlled. To avoid nozzles clogging and bubbling.

Product Detail


3554 (1)

ABS solid color

1. Excellent impact strength and abrasion resistance;

2. Good chemical resistance, dyeability, good molding and machining effects;

3. Easier to remove substrate layer.

[High Strength]

High strength and toughness. Good impact and wear resistance. Easy for machining.

ABS Filament (2)
ABS Filament (3)

[Good Mechanical Properties]

ABS has good comprehensive mechanical properties that can be widely used in machinery, electronic appliances, instrumentation, textile, construction industries, etc.

[Not Easy to Break]

 Good toughness, tensile strength and liquidity. Strict quality control for each batch. 100% no bubble.  Good printing effect without warping.

3554 (5)
3554 (6)

[High Precision of Diameter]

Tolerance of filament diamenter is controlled within ± 0.02mm. Stable and even extrusion for high printing accuracy and quality.

  • Previous:
  • Next:

  • Diameter 1.75 ± 0.2mm
    Printing Temperature 220-250℃
    Heated Bed Temperature 70-100℃
    Density 1.05 ± 0.02 g/cm3
    Heat Deflection Temperature 70-80℃
    Melt Flow Rate 2-4 g/min (190℃ 2.16kg)
    Tensile Strength ≥ 40 Mpa
    Bending Strength ≥ 60 Mpa
    Elongation at Break ≥ 10.0%
    N.W. 1.0 kg
    G.W. 1.3 kg
    Length ≈ 400m
  • Write your message here and send it to us