1. Environment friendly and Non-toxic, Medical-grade biodegradable materials;
2. Bright color;
3. Low shrinkage;
4. Low melting point;
5. Good flexibility;
6. With special repair function, repeatable molding.
Suitable for 3D pens painting and DIY model making.
The printing temperature is only 70-100 ℃. Filament cold down quickly after extruded. Can be used for children's 3D printing pen, which is safe and not hot.
Environmental friendly material. Safe, odorless and degradable. No harm for health.
Good toughness, tensile strength and liquidity. Strict quality control for each batch. 100% no bubble. Good printing effect without warping.
Tolerance of filament diameter is controlled within ± 0.02mm. Stable and even extrusion for high printing accuracy and quality.
|Diameter||1.75 ± 0.2mm|
|Heated bed temperature||No need of heating|
|Density||1.16 ± 0.05 g/cm3|
|Heat deflection temperature||40-50℃|
|Melt flow rate||3-5 g/min (100℃ 2.16kg)|
|Tensile Strength||≥ 15 Mpa|
|Bending strength||≥ 10 Mpa|
|Elongation at break||≥ 560%|