PRODUCTS

PLA Carbon Fiber 3D Printer Filament

Short Description:

Features:

1. [Premium Carbon Fiber Filament]: A stronger, sturdier and more dimensionally stable 1.75mm PLA carbon fiber. Carbon Fibers PLA Filament are perfect for printing products of thin, hollow models or models with rigid texture.
2. [Clog-free & Bubble-Free]: Completely dried for 24 hours before packaging and vacuum sealed, enable much smoother and more stable printing. Developed based on Natural PLA deliver excellent printing quality with no odor and low warping during printing.
3. [Less-tangle & Wide Compatibility] Full mechanical winding and strict manual examination, which guarantee the filaments tidy and easy to be fed. Works perfectly with most FDM 3d printers on the market, such as MK3, Ender 3, Monoprice FlashForge and etc.
4. [Dimensional Accuracy & Consistency] Advanced CCD diameter measuring and self-adaptive control system in the manufacturing ensure strict tolerances. Diameter 1.75mm, dimensional accuracy + / – 0.02 mm without any exaggeration; 1 kg spool (2.2lbs)
5. [Printing Tips] Recommended Extrusion/Nozzle Temperature 200°C – 230°C, Bed 60°C – 80°C. It will be your risk-free choice, please be assured that we’ll always stand behind our products.


Product Detail

SPECIFICATIONS

Diameter、 (1)

[High Strength with Carbon Fiber]

 Added carbon fiber.

[Environmental Friendly]

Food grade environmental friendly material. Extracted from corn or other plants. Safe, odorless and degradable. No harm for health.

Diameter、 (2)
Diameter、 (5)

[High Compatibility]

Widely used in 3D printing. Suitable for 99.99% FMD/FFF 3D printers. Easy to form and good printing effect.

[Not Easy to Break]

 Good toughness, tensile strength and liquidity. Strict quality control for each batch. 100% no bubble.  Good printing effect without warping.

Diameter、 (3)
PETG solid (4)

[High Precision of Diameter]

 Tolerance of filament diameter is controlled within ± 0.02mm. Stable and even extrusion for high printing accuracy and quality.


  • Previous:
  • Next:

  • Diameter 1.75 ± 0.2mm
    Printing temperature 175-200
    Heated bed temperature 50-80
    Density 1.25 ± 0.05 g/cm3
    Heat deflection temperature 50-60
    Melt flow rate 5-7 g/min (1902.16kg)
    Tensile Strength 60 Mpa
    Bending strength 70 Mpa
    Elongation at break 3.0%
    N.W. 1.0 kg
    G.W. 1.3 kg
    Length 330m
  • Write your message here and send it to us