PRODUCTS

PLA Carbon Fiber 3D Printer Filament

Tsanangudzo Pfupi

Features:

1. [Premium Carbon Fiber Filament]: Yakasimba, yakasimba uye yakanyanya kugadzikana 1.75mm PLA carbon fiber.Carbon Fibers PLA Filament yakanakira kudhinda zvigadzirwa zvemhando dzakatetepa, dzisina mamodheru kana modhi dzakaomarara magadzirirwo.
2. [Clog-isina & Bubble-Mahara]: Yakaomeswa zvachose kwemaawa makumi maviri nemana isati yarongedza uye vacuum yakavharwa, inogonesa kudhinda kwakapfava uye kwakatsiga.Yakagadziridzwa yakavakirwa pa Natural PLA inopa yakanakisa kudhinda mhando isina hwema uye yakaderera warping panguva yekudhinda.
3. [Zvishoma-tangle & Wide Compatibility] Yakazara mechanical winding uye yakasimba manyore yekuongorora, iyo inovimbisa filaments kutsvinda uye nyore kudyiswa.Inoshanda nemazvo nemaprinta mazhinji eFDM 3d pamusika, akadai seMK3, Ender 3, Monoprice FlashForge nezvimwe.
4. [Dimensional Accuracy & Consistency] Yepamusoro CCD dhayamita yekuyera uye inogadzirisa inogadzirisa hurongwa mukugadzira inovimbisa kushivirira kwakasimba.Diameter 1.75mm, dimensional kurongeka +/ – 0.02 mm pasina kuwedzeredza;1 kg spool (2.2lbs)
5. [Mazano Pakuprinda] Inokurudzirwa Kuwedzera/Nozzle Tembiricha 200°C – 230°C, Mubhedha 60°C – 80°C.Ichave sarudzo yako isina njodzi, ndapota iva nechokwadi chekuti tichagara takamira kuseri kwezvigadzirwa zvedu.


Product Detail

SECIFICATIONS

Diameter、 (1)

[Kusimba Kwakakwirira neCarbon Fiber]

Yakawedzera carbon fiber.

[Kushamwaridzana Nezvakatipoteredza]

Food giredhi zvakatipoteredza ushamwari zvinhu.Yakabviswa kubva muchibage kana zvimwe zvirimwa.Yakachengeteka, isinganhuhwi uye inoshatisa.Hapana chakaipa kune hutano.

Diameter、 (2)
Diameter、 (5)

[Kuenderana Kwepamusoro]

Inoshandiswa zvakanyanya mu 3D kudhinda.Inokodzera 99.99% FMD/FFF 3D maprinta.Nyore kuumba uye yakanaka kudhinda maitiro.

[Hazvisi Nyore Kutyora]

Kusimba kwakanaka, kusimba simba uye liquidity.Kudzora kwemhando yepamusoro kune yega yega batch.100% hapana bubble.Yakanaka kudhinda maitiro pasina warping.

Diameter、 (3)
PETG solid (4)

[Kunyatsojeka kweDimita]

Kushivirira kwedhayamita yefilament kunodzorwa mukati me ± 0.02mm.Yakagadzikana uye kunyange extrusion yepamusoro kudhinda kururama uye unhu.


  • Zvakapfuura:
  • Zvinotevera:

  • Diameter 1.75 ± 0.2mm
    Printing Temperature 175-200 ℃
    Heated Bed Temperature 50-80 ℃
    Density 1.25 ± 0.05 g/cm3
    Heat Deflection Temperature 50-60 ℃
    Melt Flow Rate 5-7 g/min (190℃ 2.16kg)
    Tensile Simba ≥ 60 Mpa
    Bending Strength ≥ 70 Mpa
    Elongation paBreak ≥3.0%
    NW 1.0 kg
    GW 1.3 kg
    Urefu ≈ 330m
  • Nyora meseji yako pano ugotitumira