LIHLAHISO

PLA Marble 3D Printer Filament

Tlhaloso e Khutšoanyane:

Likaroloana:

1. [Marble Rough Surface] Lifilamente tsena ha li na ponahalo ea majoe a matte feela, empa li boetse li na le maikutlo a rock.E etselitsoe ho qaptjoa ka mokhoa o motle oa litšoantšo tsa seemahale, tse ka bonts'ang lintlha tse hlakileng.Ha e loketse maemo a sebetsang a hlokang thepa e matla haholo ea 'mele.

2. [Nozzle Jamming]: Purity PLA filament lisebelisoa tse tala le mamello e phahameng ea bophara bo nepahetseng, 1.75mm +/-0.02mm.Taolo e thata ea bophara bo lekanang ba PLA filament le khetho ea lisebelisoa tse tala tsa boleng bo holimo ho qoba ho phatloha ha nozzle ho bakoang ke litšila le bophara.Ho sebetsana habonolo, deformation e fokolang.

3. [Boleng ba Premium 1.75MM Marble Filament]: Fumana extrusion e boreleli.Maqhubu a tšoanang a 3D printer filament ha a ferekane.PLA 'mabole phahameng toughness le matla lera adhesion isang ho e phethahetseng pele lera hatisitsoeng.

4. [Dimensional Accuracy & Consistency] E tsoetseng pele ea CCD bophara lekanya le ho ikamahanya le maemo taolo tsamaiso ka ho etsa tiisetso ea ho etsa tiiso ea tsena Rock PLA filaments ea 1.75 limilimithara bophara, ho nepahala dimensional + / – .05 limilimithara;1 kg spool (2.2lbs)

5. [Khothaletsa Mocheso] Licheso Tse Hatisitsoeng 190-220°c.Platform Temp:0-60°c.Bapisa likhatiso tsohle tsa 1.75 mm-specification 3d tse teng 'marakeng ntle le k'hatriji ea filament e chepiloeng.


Lintlha tsa Sehlahisoa

LIEKETSENG TS'OANELO

[Marble Texture] (1)

[Sebopeho sa Marble]

E kentsoe 'mabole joalo ka li-additives.E loketse 'mabole joalo ka khatiso, joalo ka mokhabiso, lisebelisoa tsa thepa ea ka tlung, jj.

[Tsamaiso ea Tikoloho]

Lijo kereiti tikoloho botsoalle lintho tse bonahalang.E ntšitsoeng pooneng kapa dimeleng tse ding.E bolokehile, ha e na monko ebile e senyeha.Ha ho kotsi bakeng sa bophelo bo botle.

[Marble Texture] (2)
[Marble Texture] (3)

[Ho lumellana ho Phahameng]

E sebelisoa haholo khatisong ea 3D.E loketse 99.99% ea lihatisi tsa 3D tsa FMD/FFF.Ho bonolo ho theha le phello e ntle ea khatiso.

[Ha ho bonolo ho qhetsola]

Matla a matle, matla a ho tsitsa le ho ba le mokelikeli.Taolo ea boleng bo thata bakeng sa sehlopha ka seng.100% ha ho bubble.Phello e ntle ea khatiso ntle le ho loana.

PLA Metallic Filament (4)
PETG solid (4)

[Bonepa bo Phahameng ba Bophara]

Mamello ea bophara ba filament e laoloa ka hare ho ± 0.02mm.E tsitsitseng esita le extrusion bakeng sa ho nepahala ho phahameng ho hatisa le boleng.


  • E fetileng:
  • E 'ngoe:

  • Diameter 1.75 ± 0.2mm
    Mocheso oa Khatiso 175-200 ℃
    Mocheso oa Bethe e Chesang 50-80 ℃
    Botenya 1.25 ± 0.05 g/cm3
    Mocheso oa ho Fetola Mocheso 50-60 ℃
    Melt Flow Rate 5-7 g/mots (190℃ 2.16kg)
    Matla a tšepe ≥ 60 Mpa
    Matla a Kobehang ≥ 70 Mpa
    Elongation at Break ≥3.0%
    NW 1.0 lik'hilograma
    GW 1.3 lik'hilograma
    Bolelele ≈ 330m
  • Ngola molaetsa wa hao mona mme o re romele wona