KAYANA

PLA Marble 3D Filament

Takaitaccen Bayani:

Siffofin:

1. [Marble Rough Surface] Wannan filaments yana nuna ba kawai matte dutse na gani ba, har ma da ji.An ƙera shi don ƙayataccen ƙirar mutum-mutumin kwafin jigo, wanda zai iya nuna cikakkun bayanai masu kaifi.Bai dace da yanayin aiki ba wanda ke buƙatar kaddarorin jiki masu ƙarfi sosai.

2. [Nozzle Jamming]: Purity PLA filament albarkatun kasa da kuma high daidaici diamita haƙuri, 1.75mm +/-0.02mm.Ƙuntataccen ikon sarrafa diamita na filament PLA uniform da zaɓi na kayan albarkatun ƙasa masu inganci don gujewa cunkoson bututun ƙarfe wanda ƙazanta da diamita suka haifar.Sauƙaƙan sarrafawa, ƙarancin lalacewa.

3. [Premium Quality 1.75MM Marble Filament]: Samun m extrusion.Juyawa Uniform na filament na firinta na 3D ba tare da samun tangle ba.PLA marmara babban tauri da ƙarfi mai ƙarfi na mannewa yana kaiwa zuwa cikakkiyar bugu na farko.

4. [Dimensional Accuracy & Consistency] Advanced CCD diamita aunawa da kuma kai-adaptive kula da tsarin a masana'antu garanti wadannan Rock PLA filaments na 1.75 mm diamita, girma daidaito + / - .05 mm;1 kilogiram spool (2.2lbs)

5. [Shawarar Zazzabi] Zazzagewa Bugawa 190-220°c.Platform Temp:0-60°c.Daidaita duk firintocin 3d na ƙayyadaddun mm 1.75 a cikin kasuwa ban da harsashin filament na guntu.


Cikakken Bayani

BAYANI

[Marble Texture] (1)

[Marble Texture]

Ƙara marmara kamar ƙari.Ya dace da marmara kamar bugu, kamar kayan ado, kayan ɗaki, da sauransu.

[Amincin Muhalli]

Kayan ingancin muhallin abinci.Cire daga masara ko wasu tsire-tsire.Amintacce, mara wari kuma mai lalacewa.Babu illa ga lafiya.

[Marble Texture] (2)
[Marble Texture] (3)

[Babban Daidaitawa]

An yi amfani da shi sosai a cikin bugu na 3D.Ya dace da 99.99% FMD/FFF 3D firintocin.Sauƙi don samar da sakamako mai kyau na bugu.

[Ba Sauƙin Karyewa]

Kyakkyawar tauri, ƙarfin ɗaure da ruwa.Ƙuntataccen kulawar inganci ga kowane tsari.100% babu kumfa.Kyakkyawan tasirin bugawa ba tare da warping ba.

PLA Metallic Filament (4)
PETG solid (4)

[Babban Madaidaicin Diamita]

Ana sarrafa haƙurin diamita na filament tsakanin ± 0.02mm.Barga har ma extrusion ga high bugu daidaito da kuma ingancin.


  • Na baya:
  • Na gaba:

  • Diamita 1.75 ± 0.2mm
    Zazzabi na bugawa 175-200 ℃
    Zafin Kwanciya 50-80 ℃
    Yawan yawa 1.25 ± 0.05 g/cm3
    Zafin Rage Zafi 50-60 ℃
    Narkar da Ruwan Ruwa 5-7 g/min (190℃ 2.16kg)
    Ƙarfin Ƙarfi ≥ 60 Mpa
    Karfin Lankwasa ≥ 70 Mpa
    Tsawaitawa a Break ≥3.0%
    NW 1.0 kg
    GW 1.3 kg
    Tsawon ≈ 330m
  • Ku rubuta sakonku anan ku aiko mana