IMIKHIQIZO

I-PLA Wood Color 3D Printer Filament

Incazelo emfushane:

Izici:

1. [I-Wood Like Color] Le micu ingakhipha amaphrinti anombala omuhle wokhuni kanye nokuthungwa kwayo., okuyenza ifaneleke kakhulu ekudalweni okudinga ukubukeka okunokhiye ophansi, okucebile nokungaqondakali.
2. [Kulula Ukuphrinta] — Kulula ukuyiphrinta njenge-PLA evamile.I-threshold overhang angle enhle kakhulu.I-Raft nokusekelwa kulula kakhulu ukususa.Thola i-extrusion ebushelelezi.Ukusonteka okufanayo kwentambo yephrinta ye-3D ngaphandle kokuhlangana.
3. [Ayinaphunga & Alikho Ibhamuza] — Ithuthukiswe ngokusekelwe ku-PLA Yemvelo, ukhuni olufana nombala luletha ikhwalithi enhle kakhulu yokunyathelisa engenawo iphunga nokungqubuzana okuphansi ngesikhathi sokuphrinta;Qedela ukomisa amahora angama-24 ngaphambi kokupakishwa kwe-vacuum ukuze uvikele ngempumelelo umcu kumswakama, akukho zintambo futhi akunabhamuza.
4. [Ukunemba Kobukhulu Nokuvumelana] Okuthuthukisiwe kwe-CCD yokulinganisa ububanzi kanye nesistimu yokulawula ukuzivumelanisa nezimo kusiqiniseko sokukhiqiza le micu ye-PLA Matte enobubanzi obungu-1.75 mm, ukunemba kwe-dimensional + / – .05 mm;1 kg i-spool (2.2lbs)
5. [Ncoma Izinga Lokushisa] Amazinga Okushisa Aphrintiwe 190-220°c.I-Platform Temp:0-60°c.Qondanisa wonke amaphrinta we-3d acaciswe ngu-1.75 mm emakethe ngaphandle kwe-cartridge ye-filament eqoshiwe.


Imininingwane Yomkhiqizo

IMICIMBI

PLA Wood Filament (1)

[Ukwakheka Kwezinkuni]

Ukhuni olufana nombala nokuthungwa.Ifanele uboya obufana nokuphrinta, njengokuhlobisa, izesekeli zefenisha, njll.

[Inobungani Nemvelo]

Ibanga lokudla impahla enobungani kwemvelo.Ikhishwe kummbila noma ezinye izitshalo.Iphephile, ayinaphunga futhi iyabola.Ayikho ingozi empilweni.

PLA Metallic Filament (3)
PLA Wood Filament (3)

[Ukuhambisana okuphezulu]

Isetshenziswa kabanzi ekuphrinteni kwe-3D.Ifanele amaphrinta angu-99.99% e-FMD/FFF 3D.Kulula ukwakha kanye nomphumela omuhle wokuphrinta.

[Akulula ukuphula]

Ukuqina okuhle, amandla okuqina kanye ne-liquidity.Ukulawulwa kwekhwalithi okuqinile kweqeqebana ngalinye.100% alikho ibhamuza.Umphumela omuhle wokuphrinta ngaphandle kokungqubuzana.

PLA Metallic Filament (4)
PETG solid (4)

[Ukunemba okuphezulu kobubanzi]

Ukubekezelela ububanzi be-filament kulawulwa ngaphakathi kuka-± 0.02mm.Izinzile futhi i-extrusion yokunemba okuphezulu kokuphrinta nekhwalithi.


  • Okwedlule:
  • Olandelayo:

  • Ububanzi 1.75 ± 0.2mm
    Izinga Lokushisa Lokuphrinta 175-200 ℃
    Izinga Lokushisa Lombhede 50-80℃
    Ukuminyana 1.25 ± 0.05 g/cm3
    I-Heat Deflection Temperature 50-60 ℃
    Melt Flow Rate 5-7 g/min (190℃ 2.16kg)
    Amandla Okuqina ≥ 60 Mpa
    Ukugoba Amandla ≥ 70 Mpa
    Elongation at Break ≥3.0%
    NW 1.0 kg
    GW 1.3 kg
    Ubude ≈ 330m
  • Bhala umlayezo wakho lapha futhi usithumelele wona