HANA

PLA Wood Color 3D Printer Filament

ʻO ka wehewehe pōkole:

Nā hiʻohiʻona:

1. [Wood Like Color] Hiki i kēia filament ke hoʻopuka i nā paʻi me ka ʻili nani o ka waihoʻoluʻu lāʻau a me ke ʻano.
2. [Easy to Print] — Maʻalahi e paʻi e like me ka PLA maʻamau.ʻOi aku ka maikaʻi o ka paepae overhang kihi.He maʻalahi loa ka wehe ʻana i ka lāʻau a me ke kākoʻo.E kiʻi i ka extrusion maʻalahi.ʻO ka wili like ʻana o ka filament paʻi 3D me ka loaʻa ʻole o ka kuʻi.
3. [Odorless & No Bubble] — Hoʻokumu ʻia ma muli o ka PLA Natural, hāʻawi ka lāʻau e like me ke kala i ka maikaʻi o ka paʻi ʻana me ka ʻala ʻole a me ka haʻahaʻa warping i ka wā paʻi;Hoʻomaloʻo piha ʻia no 24 mau hola ma mua o ka hoʻopaʻa ʻana i ka momi no ka pale pono ʻana i ka filament mai ka makū, ʻaʻohe kaula a me ka ʻole o ka huʻi.
4. [Dimensional Accuracy & Consistency] Kiʻekiʻe CCD anawaena ana a me ka pakiko-adaptive mana nenoaiu i loko o ka manufacturing hōʻoiaʻiʻo i kēia mau PLA Matte filaments o 1.75 mm anawaena, dimensional pololei + / - .05 mm;1 kg spool (2.2lbs)
5. [Manaʻo Manaʻo] Paʻi ʻia ʻo 190-220°c.Paena Temp0-60°c.Hoʻohālikelike i nā mea paʻi 3d kikoʻī 1.75 mm ma ka mākeke koe wale nō ka pahu filament chipped.


Huahana Huahana

OLELO HOOLAHA

PLA Wood Filament (1)

[Kiʻi lāʻau]

E like me ka lāʻau ke kala a me ke ʻano.He kūpono no ka hulu hipa e like me ka paʻi ʻana, e like me ka hoʻonaninani, nā lako lako, etc.

[Kaiapuni]

Mea ʻai meaʻai pili kaiapuni.Wehe ʻia mai ke kulina a i ʻole nā ​​mea kanu ʻē aʻe.Palekana, ʻaʻala ʻole a hoʻohaʻahaʻa ʻia.ʻAʻohe pōʻino no ke olakino.

PLA Metallic Filament (3)
PLA Wood Filament (3)

[Hoʻohālikelike Kiʻekiʻe]

Hoʻohana nui ʻia i ka paʻi 3D.He kūpono no 99.99% FMD/FFF 3D paʻi.Maʻalahi ka hana a me ka hopena paʻi maikaʻi.

[ʻAʻole maʻalahi ka haki]

ʻO ka paʻakikī maikaʻi, ka ikaika tensile a me ka wai.Ka mana maikaʻi koʻikoʻi no kēlā me kēia pūʻulu.100% ʻaʻohe pulu.ʻO ka hopena paʻi maikaʻi ʻole me ka warping.

PLA Metallic Filament (4)
PETG solid (4)

[Kakaulike kiʻekiʻe o ke anawaena]

Hoʻomalu ʻia ka hoʻomanawanui o ke anawaena filament i loko o ± 0.02mm.Paʻa a hiki i ka extrusion no ka paʻi kiʻekiʻe a me ka maikaʻi.


  • Mua:
  • Aʻe:

  • Anawaena 1.75 ± 0.2mm
    Paʻi Mahana 175-200 ℃
    Ka Mahana Moena Pumehana 50-80 ℃
    ʻO ka mānoanoa 1.25 ± 0.05 g/cm3
    Wela hoʻoheheʻe wela 50-60 ℃
    Kahe Kahe 5-7 g/min (190℃ 2.16kg)
    Ikaika U'i ≥ 60 Mpa
    Kulou ikaika ≥ 70 Mpa
    Elongation ma ka Haka ≥3.0%
    NW 1.0 kg
    GW 1.3 kg
    Ka lōʻihi ≈ 330m
  • E kākau i kāu leka ma aneʻi a hoʻouna mai iā mākou