IIMVELISO
ILaserCube LC100 Umatshini Wokukrola weLaser ophathwayo
[Iizinto ezahlukeneyo zokukrola]
[Ukuchaneka okuPhezulu, iiNkcukacha eziNgcono]
[Encinci & iphathekayo]
[Ulawulo lwe-APP, kulula ukuyisebenzisa]
[Power Bank Drive]
[Lungisa ubude kunye nendlela]
[Zenzele eyakho ipateni yokukrola]
| Ubungakanani bokukrola | 100*100mm(3.9”*3.9”) |
| Umgama wokuSebenza | 20cm(7.9”) |
| Uhlobo lweLaser | 405mm Semi-Conductor Laser |
| Amandla eLaser | 500mW |
| Izixhobo ezixhaswayo | Umthi, iPhepha, iBamboo, iPlastiki, ufele, ilaphu, iPeel, njl |
| Izinto ezingaXhaswanga | Iglasi, iMetal, iJewel |
| Uqhagamshelwano | IBluetooth 4.2 / 5.0 |
| Isoftware yoshicilelo | LaserCube App |
| I-OS exhaswayo | Android / iOS |
| Ulwimi | IsiNgesi / isiTshayina |
| Ungeniso lokuSebenza | 5 V -2 A, USB Type-C |
| Isiqinisekiso | CE, FCC, FDA, RoHS, IEC 60825-1tt |
1. Buthini ubungakanani kunye nomgama womzobo?
Umsebenzisi unokwenza ubungakanani bokukrola, kunye nobukhulu bobukhulu bokukrola obuyi-100mm x 100mm.Umgama onconywayo ukusuka kwintloko ye-laser ukuya kwindawo yento yi-20cm.
2. Ndingakwazi ukukrola kwizinto eziconcave okanye ezingqukuva?
Ewe, kodwa akufuneki ikrole imilo enkulu kakhulu kwizinto ezineradian enkulu kakhulu, okanye umzobo uya kukhubaza.
3.Ndingayikhetha njani ipateni efuna ukukrolwa?
Unokukhetha iipateni zokukrola ngokuthatha iifoto, imifanekiso kwigalari yefowuni yakho, imifanekiso esuka kwigalari eyakhelwe-ngaphakathi ye-App, kunye nokudala iipateni kwi-DIY.Emva kokugqiba ukusebenza kunye nokuhlela umfanekiso, ungaqala ukukrola xa umboniso ulungile.
4.Yiyiphi into enokukrolwa?Ngawaphi awona mandla kunye nobunzulu bomkrolo?
| Izinto ezikroliweyo | Amandla acetyiswayo | Ubunzulu obugqwesileyo |
| Ithathiwe | 100% | 30% |
| Eco-friendly Paper | 100% | 50% |
| Isikhumba | 100% | 50% |
| Ngoqalo | 100% | 50% |
| Iplanga | 100% | 45% |
| Isikhokho | 100% | 40% |
| Iplastiki | 100% | 10% |
| I-Resin ye-Photosensitive | 100% | 100% |
| Ilaphu | 100% | 10% |
| Ilaphu elivayo | 100% | 35% |
| I-Axon ecacileyo | 100% | 80% |
| I-Peel | 100% | 70% |
| Itywina elinovakalelo lokukhanya | 100% | 80% |
Ukongeza, unokwenza ngokwezifiso amandla okukrola kunye nobunzulu ukufezekisa iziphumo ezahlukeneyo kwaye ukrole izixhobo ezahlukeneyo.
5.Ngaba isinyithi, ilitye, iiseramikhi, iglasi kunye nezinye izinto zinokukrolwa?
Izinto ezinzima ezifana nentsimbi kunye nelitye azikwazi ukukrolwa, kunye ne-ceramic kunye neglasi.Ziyakwazi ukukrolwa kuphela xa zongeza umaleko wokudlulisa i-thermal kumphezulu.
6.Ngaba i-laser ifuna izinto ezisetyenziswayo kwaye ihlala ixesha elingakanani?
Imodyuli yelaser ngokwayo ayifuni izinto ezisetyenziswayo;umthombo welaser we-semiconductor ongeniswe eJamani unokusebenza ngaphezulu kweeyure ezingama-10,000.Ukuba uyisebenzisa iiyure ezi-3 ngosuku, i-laser inokuhlala iminyaka eyi-9 ubuncinane.
7.Ngaba iilaser ziyawonakalisa umzimba womntu?
Le mveliso yeyodidi lwesine lweemveliso ze-laser.Ukusebenza kufuneka kuhambelane nomyalelo, okanye kuya kubangela ukulimala kwesikhumba okanye amehlo.Ukhuseleko lwakho, hlala uphaphile xa umatshini usebenza.MUSA UKUJONGA LASER NGQO.Nceda unxibe iimpahla ezifanelekileyo kunye nezixhobo zokhuseleko zokhuseleko, ezifana (kodwa kungaphelelanga apho) izibuko ezikhuselayo, ikhaka elikhanyayo, iimpahla ezikhusela ulusu njl.njl.
8.Ngaba ndinokuhambisa umatshini ngexesha lenkqubo yokukrola?Kuthekani ukuba isixhobo silukhuselo lokuvala?
Ukuhambisa imodyuli ye-laser ngexesha lokusebenza kuya kubangela ukukhuselwa kokuvalwa, okwenzelwe ukukhusela ukulimala ukuba umatshini ushukunyiswa ngengozi okanye uguqulwe.Qinisekisa ukuba umatshini usebenza kwiqonga elizinzileyo.Ukuba ukhuseleko lokuvalwa lubasiwe, unokuphinda uqalise i-laser ngokukhupha intambo ye-USB.
9.Ukuba umbane uphelile, ndingaphinda ndiqalise umzobo emva kokudibanisa umbane kwakhona?
Hayi, qiniseka ukuba unikezelo lwamandla luzinzile ngexesha lokukrola.
10.Kuthekani ukuba i-laser ayikho embindini emva kokukhanyisa?
I-laser yesixhobo iye yahlengahlengiswa ngaphambi kokuba ushiye umzi-mveliso.
Ukuba akunjalo, kunokubangelwa ngumonakalo ngexesha lokusebenza okanye ukungcangcazela ngexesha lokuthunyelwa.Kule meko, yiya ku "Malunga neLaserCube", cinezela ixesha elide iphethini ye-LOGO ukuze ufake i-interface yokulungiswa kwe-laser ukulungelelanisa indawo ye-laser.
11.Ndisiqhagamshela okanye ndisiqhawule njani isixhobo?
Xa uqhagamshela isixhobo, nceda uqinisekise ukuba isixhobo sivuliwe kwaye nomsebenzi weBluetooth wefowuni ephathwayo uvuliwe.Vula i-APP kwaye ucofe kwisixhobo ukuze uqhagamshelwe kuluhlu lweBluetooth ukuqhagamshela.Emva kokuba uqhagamshelo luphumelele, luya kungena ngokuzenzekelayo kwiphepha lasekhaya le-APP.Xa ufuna ukuqhawula, cofa isixhobo esiqhagamshelwe kwi-interface yoqhagamshelo lweBluetooth ukuze uqhawule.
12.Ngemibuzo emininzi, nceda uqhagamshelane nenkonzo yabathengi.
