IIMVELISO

PETG 3D Printer Filament

Inkcazelo emfutshane:

Iimbonakalo:

1. [Ukudibanisa i-PLA kunye ne-ABS] I-PETG i-filament idibanisa iingenelo zombini i-PLA 3D yomshicileli we-filament kunye ne-ABS 3D yomshicileli we-filament, kulula ukuyisebenzisa njenge-PLA, amandla ahlala eqinile njenge-ABS.
2. [I-clog-free & i-Bubble-Free] Iyilwe kwaye Yenziwe ngeClog-Free patent ukuqinisekisa amava oshicilelo agudileyo kwaye azinzileyo.Gqibezela ukomisa iiyure ezingama-24 ngaphambi kokupakishwa kwefoyile ye-aluminium vacuum, enokukhusela ngokufanelekileyo i-PETG filament kumswakama.
3. [Ukuchaneka komDimensional & Consistency] Ezi filaments ezinzima zePETG ukuba zibe nokunyamezelana okungqongqo.Ububanzi be-1.75mm, ukuchaneka kwe-dimensional + / - 0.02 mm ngaphandle kobaxo;I-1 kg ye-spool (2.2lbs).
4. [I-Wide Compatibility] Ndiyabulela kwimigangatho yomgangatho ophezulu ngokubhekiselele ekuchanekeni kwemveliso kunye nokunyamezela okuncinci kwi-diameter ye +/- 0.02mm, inokusebenza kwaye ihambelane ngokugqibeleleyo nazo zonke iiprinta eziqhelekileyo ze-1.75mm FDM 3D.
5. [AkunaMngcipheko] Iwaranti yasimahla yenyanga enye, iintsuku ezingama-30 yimali-mbuyekezo ukuba awanelisekanga.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

INGCACISO

1. Imeko-bume enobubele kwaye ayinayo ityhefu;

2. Umbala oqaqambileyo;

3. Ukuncipha okuphantsi;

4. Ukuqina okuhle, akulula ukuba yi-brittle, i-asidi elungileyo kunye nokumelana ne-alkali, ukuqina okugqwesileyo, ukuxhathisa imozulu, ukubambelela kakuhle;

5.Uzinzo oluhle lwe-dimensional, akukho zintanda kunye ne-warping;

6.Ukukhanya okuphezulu, iglosi elungileyo

Ifanelekile kuzo zonke iimodeli zeFDM 3D abashicileli.Ilungele ukuprinta zonke iintlobo zeemodeli ezisetyenziswa ngokuqhelekileyo, ubugcisa, iinxalenye zobunjineli, amagama entengiso, njl.

[Ukukhanya okuphezulu]

Ushicilelo lunokwakheka okuhle kunye nokukhazimla okuhle komphezulu kunye nokuhanjiswa kokukhanya okunamandla.

[Kulula ukuShicilela kunye namandla aphezulu]

I-PETG inokuqina okuphezulu kunye namandla empembelelo ephezulu xa kuthelekiswa ne-PLA.Idibanisa iimpawu ezintle zoomatshini be-ABS kunye nokusebenza kakuhle koshicilelo lwePLA ekulula ukuyiprinta ngaphandle kokungqubana.

[Ukumelana neMozulu eLungileyo]

Ukuchasana kwemozulu okugqwesileyo kunye nokuchasana kweekhemikhali, ezichasene neentlobo zeekhemikhali kunye neearhente zokucoca eziqhelekileyo.

[Ubunyulu obuPhezulu]

Imathiriyeli ekrwada yobunyulu obuphezulu.I-ROHS iyahambelana.Akukho kungcola okanye imathiriyeli esetyenzisiweyo.Yenza i-extrusion ezinzileyo kunye negudileyo ngaphandle kweejam ze-nozzle.

[Akululanga ukuqhawuka]

Ukuqina okuhle, ukomelela kokuqina kunye nokungabi namali.Ulawulo olungqongqo lwekhwalithi kwibhetshi nganye.100% akukho qamza.Isiphumo esihle sokushicilela ngaphandle kokuguqula.

[Ukuchaneka okuphezulu koDayamitha]

Ukunyamezela kwedayamitha yefilament kulawulwa ngaphakathi ± 0.02mm.Izinzile kunye ne-extrusion yokuchaneka okuphezulu kunye nomgangatho.

Ngaphambili: ABS 3D Printer Filament

Okulandelayo: TPU 3D Printer Filament

Ububanzi	1.75 ± 0.2mm
Ubushushu bokushicilela	220-250℃
Ubushushu bebhedi eshushu	70-80℃
Ukuxinana	1.05 ± 0.02 g/cm³
Ubushushu bokutshintsha ubushushu	60-70℃
Melt Flow Rate	6-11 g/min (220℃ 2.16kg)
Tensile Strength	≥ 45 Mpa
Ukugoba Amandla	≥ 60 Mpa
Ukwandiswa ngexesha lekhefu	≥ 210%
NW	1.0 kg
GW	1.3 kg
Ubude	≈ 330m