KAYANA

PETG 3D Filament

Takaitaccen Bayani:

Siffofin:

1. [Hada PLA da ABS] PETG filament hadawa da abũbuwan amfãni na biyu PLA 3D printer filament da ABS 3D printer filament, sauƙi don amfani kamar PLA, m ƙarfi kamar ABS.
2. [Clog-free & Bubble-Free] An ƙirƙira da kera shi tare da lasisin Clog-Free don ba da tabbacin ƙwarewar bugu mai santsi da kwanciyar hankali.Cikakken bushewa na sa'o'i 24 kafin marufi na aluminum, wanda zai iya kare filament na PETG yadda ya kamata daga danshi.
3. [Dimensional Accuracy & Consistency] Wadannan m PETG filaments su zama m tolerances.Diamita 1.75mm, daidaiton girman +/- 0.02 mm ba tare da ƙari ba;1 kilogiram (2.2 lbs).
4. [Wide Compatibility] Godiya ga ma'auni masu inganci dangane da daidaiton masana'anta da ƙananan haƙuri a diamita na +/- 0.02mm, yana iya aiki da daidaitawa daidai da duk mafi yawan 1.75mm FDM 3D na yau da kullun.
5. [Risk-Free] Garanti na kyauta na wata ɗaya, Kuɗi na kwana 30 idan ba ku gamsu ba.

Aika mana imel

Cikakken Bayani

BAYANI

1. Muhalli mai kyau da mara guba;

2. Launi mai haske;

3. Ƙananan raguwa;

4. Kyakkyawan tauri, ba sauƙin zama mai gasa ba, mai kyau acid da juriya na alkali, kyakkyawan ƙarfi, juriya na yanayi, mannewa mai kyau;

5.Good girma kwanciyar hankali, babu fasa da warping;

6.High nuna gaskiya, mai kyau sheki

Ya dace da duk samfuran firintocin FDM 3D.Ya dace da bugu kowane nau'in samfuran da aka saba amfani da su, sana'a, sassan injiniya, kalmomin talla, da sauransu.

[High Transparency]

Buga yana da kyakkyawan rubutu tare da kyakyawan yanayi mai kyau da watsa haske mai ƙarfi.

[Sauƙi don Bugawa da Ƙarfi mafi girma]

PETG yana da ƙarfi mafi girma da ƙarfin tasiri idan aka kwatanta da PLA.Ya haɗu da kyawawan kayan aikin injiniya na ABS da kyakkyawan aikin bugawa na PLA wanda ke da sauƙin bugawa ba tare da warping ba.

[Kyakkyawan Juriya na Yanayi]

Kyakkyawan juriya na yanayi da juriya na sinadarai, wanda ke jure wa nau'ikan sinadarai da abubuwan tsaftacewa na gama gari.

[Mafi Girma]

Raw abu na high tsarki.ROHS mai yarda.Babu ƙazanta ko kayan da aka sake fa'ida.Kunna barga da santsin extrusion ba tare da matsi na bututun ƙarfe ba.

[Ba Sauƙin Karyewa]

Kyakkyawar tauri, ƙarfin ɗaure da ruwa.Ƙuntataccen kulawar inganci ga kowane tsari.100% babu kumfa.Kyakkyawan tasirin bugawa ba tare da warping ba.

[Babban Madaidaicin Diamita]

Ana sarrafa haƙurin diamita na filament tsakanin ± 0.02mm.Barga har ma extrusion ga high bugu daidaito da kuma ingancin.

Na baya: Filament na ABS 3D Printer

Na gaba: TPU 3D Filament

Diamita	1.75 ± 0.2mm
Zazzabi na bugawa	220-250 ℃
Zafin Kwanciya	70-80 ℃
Yawan yawa	1.05 ± 0.02 g/cm³
Zafin Rage Zafi	60-70 ℃
Narkar da Ruwan Ruwa	6-11 g/min (220 ℃ 2.16kg)
Ƙarfin Ƙarfi	≥ 45 Mpa
Karfin Lankwasa	≥ 60 Mpa
Tsawaitawa a Break	≥ 210%
NW	1.0 kg
GW	1.3 kg
Tsawon	≈ 330m