IMIKHIQIZO

I-PCL 3D Printer Filament

Incazelo emfushane:

Izici:
1. [IZIMALI EZIPHEPHILE KANYE NEMPILO]: Uma kuqhathaniswa ne-PLA, i-PCL filament enezinga lokushisa eliphansi lokuncibilika elingu-70℃okuqeda ingozi yokushiswa kwezandla.Ngaphandle kwalokho, ukugcwaliswa kabusha kwe-PCL filament kuphuma ku-100% ezinsizeni zezitshalo ezivuselelekayo ezingenabuthi, ezingenaphunga, ezingacasuli futhi ezibolayo.
2. [ULTRA-SMOOTH] I-PCL filament yepeni le-3D elinobuchwepheshe bokukhulula iTemp Ephansi kanye nomcu we-PCL onembe kakhulu ongu-1.75mm ububanzi kuqinisekisa umdwebo wakho we-3D ngokushelela kakhulu ngaphandle kwezinsalela ezinamafutha noma amabhamuza, akukho ukuvaleka.
3. [IKHWALITHI ELIPHEZULU] Ipeni Le-3D Lekhwalithi Ephakeme Nokunemba Okuphezulu liphinda ligcwalise ngo-1.75mm, ukunemba kobukhulu + / – .05 mm ngaphandle kwehaba.
4. [UKUHAMBISANA KWE-UNIVERSAL] Ihambisana nama-3D Pens/3D Printers amaningi emakethe.
5. [Kuhle ukuthi izingane zidale ] I-Printer Filament iyisipho esihle kakhulu sezingane ngoKhisimusi, izinsuku zokuzalwa, namaholide;Lungiselela impahla eyanele ukuze uguqule umqondo wenoveli ube ngokoqobo.

Thumela i-imeyili kithi

Imininingwane Yomkhiqizo

IMICIMBI

1. Imvelo enobungane futhi Ayinabuthi, izinto ezibolayo zezinga lezokwelapha;

2. Umbala ogqamile;

3. Ukuncipha okuphansi;

4. Iphuzu elincibilikayo eliphansi;

5. Ukuguquguquka okuhle;

6. Ngomsebenzi okhethekile wokulungisa, ukubumba okuphindaphindiwe.

Ifanele ukudweba kwamapeni e-3D nokwenza imodeli ye-DIY.

[Izinga Lokushisa Lokuphrinta Eliphansi]

Izinga lokushisa lokuphrinta lingu-70-100 ℃ kuphela.I-Filament ibanda ngokushesha ngemva kokukhishwa.Ingasetshenziselwa ipeni lokuphrinta le-3D lezingane, eliphephile futhi elingashisi.

[Inobungani Nemvelo]

Izinto ezihambisana nemvelo.Iphephile, ayinaphunga futhi iyabola.Ayikho ingozi empilweni.

[Akulula ukuphula]

Ukuqina okuhle, amandla okuqina kanye ne-liquidity.Ukulawulwa kwekhwalithi okuqinile kweqeqebana ngalinye.100% alikho ibhamuza.Umphumela omuhle wokuphrinta ngaphandle kokungqubuzana.

[Ukunemba okuphezulu kobubanzi]

Ukubekezelela ububanzi be-filament kulawulwa ngaphakathi kuka-± 0.02mm.Izinzile futhi i-extrusion yokunemba okuphezulu kokuphrinta nekhwalithi.

Okwedlule: I-TPU 3D Printer Filament

Olandelayo: I-PLA Silk 3D Printer Filament

Ububanzi	1.75 ± 0.2mm
Izinga Lokushisa Lokuphrinta	70-100 ℃
Izinga Lokushisa Lombhede	Asikho isidingo sokushisisa
Ukuminyana	1.16 ± 0.05 g/cm³
I-Heat Deflection Temperature	40-50 ℃
Melt Flow Rate	3-5 g/min (100℃ 2.16kg)
Amandla Okuqina	≥ 15 Mpa
Ukugoba Amandla	≥ 10 Mpa
Elongation at Break	≥ 560%
NW	1.0 kg
GW	1.3 kg
Ubude	≈ 360m