English
Quote

IIMVELISO

BestGee T300S Pro Desktop 3D Printer Featured Image
  • BestGee T300S Pro Desktop 3D Printer
  • BestGee T300S Pro Desktop 3D Printer
  • BestGee T300S Pro Desktop 3D Printer
  • BestGee T300S Pro Desktop 3D Printer

BestGee T300S Pro Desktop 3D Printer

Inkcazelo emfutshane:

I-TronHoo BestGee T300S Pro yi-desktop ekumgangatho ophezulu we-FDM/FFF 3D umshicileli wabathengi.Yimshicileli osebenzayo we-3D ojolise ekuncedeni abadali ukuba benze kwaye baprinte ngendlela ekrelekrele, elula nelula.I-T300S Pro ithatha imodyuli yesakhelo sesinyithi sokuthembeka nokusebenza ngokulula.Igqamile ngeempawu eziguquguqukayo njenge-4.3'' yombala wesikrini sombala, ibhedi yoshicilelo olushushu olukhawulezayo, ukulinganisa okuzenzekelayo, ukuchaneka okuchanekileyo kunye nokuzinza kwe-filament extrusion, umthamo omkhulu wokwakha, ukubonwa kwe-filament run-out kunye ne-bussle-free resume ekuphumeni kombane.Jabulela ukuzonwabisa kunye neenzuzo zeteknoloji yoshicilelo lwe-3D kunye ne-TronHoo BestGee T300S Pro FDM/FFF 3D umshicileli.

 

√ Ibhedi yoShicilelo eFast-Heat-up

√ UkuZinzisa iNqanaba ukuze ufumane amava oMsebenzisi ongcono

√ Inkqubo yeMoto ye-TMC2208 yokuNxingisa ngokuSebenzayo

√ Ukutshintsha koMda woMbane woMbane ukuze ube neNdawo echanekileyo

√ uMqulu omkhulu woKwakha (300*300*400mm)

√ I-Filament Extrusion echanekileyo neZinzileyo

√ Ukufunyanwa kweFilament kuPheleleyo

√ UkuQalwa koKumka koMbane okungenazinkathazo

√ Ulwakhiwo lweModyuli yeMetal yokuSeta ngokulula

√ 4.3'' Isikrini soMbala weTouch

√ Shicilela UkuKhanya ukuze kujongwe iNkqubo

√ Isalathisi esinemibala emininzi yokubonakalisa ubume obahlukileyo

√ Ukususwa Koshicilelo Olulula


Iinkcukacha zeMveliso

INGCACISO

Ii-FAQs

Khuphela

Iimbonakalo

T300Pro英文版（8）_03

[Umqulu omkhulu woKwakha]

300 * 300 * 400 mm umthamo wokwakha omkhulu, okhoyo kwiingcamango ezinkulu.

[4.3” Umbala weSkrini sokuNciba]

4.3-intshi epheleleyo umbala definition eliphezulu Capacitive touch screen.Inobuhlobo kwaye kulula ukuyisebenzisa i-UI eneempawu ezityebileyo.

T300Pro英文版（8）_05
3000s por (3)

[Ingxolo ephantsi kakhulu]

Inkqubo ye-TMC2208 motor drive, i-denoising esebenzayo, ukushicilela ngaphandle kokuphazamiseka.

[Umgangatho ozenzekelayo]

I-matrix-auto-leveling ene-sensor yomgama ochanekileyo kunye nembuyekezo yomgangatho oguqukayo.

T300Pro英文版（8）_07
T300Pro英文版（8）_10

[I-Extrusion echanekileyo kunye neZinzileyo]

Yenza ukuba unqumame kwaye utshintshe imicu enemibala eyahlukeneyo kushicilelo oluphakathi ukuze uprinte imifuziselo yemibala emininzi.

[IFilament iPhelele ngaphandle kokufunyanwa]

Inkqubo yokukhangela i-filament yexesha lokwenyani enovakalelo.Ukunqumamisa ngokuzenzekela ushicilelo xa umsonto uphelelwa.

1
2

[UkuBuyiswa koMbane]

Ukukhuselwa kombane kunye nokubuyisela ukuprinta.Isitshixo esinye siqhubeke noshicilelo ngaphandle kwekhefu.

[Shicilela isibane]

Izibane ezincedisayo ze-LED, jonga imeko yokushicilela ngokucacileyo nangaliphi na ixesha.

56
57

[Isalathisi esinemibala emininzi]

Ukukrwaqula okukodwa kokushicilela ukukhanya kusetyenziswa umbala ogcweleyo we-LED.Yenza owakho umbala wokukhanya womshicileli.

[Ithembekile kwaye ikhuselekile]

UKUTHETHA KAKUHLE unikezelo lwamandla, ukusebenza kakuhle okuphezulu, okuthembekileyo kunye nobomi obude.Ukukhuselwa kokusilela kukonke, kukhuselekile ukusebenzisa.

3000s por (9)
3000s por (10)

[Ukushenxisa Ushicilelo olula]

Susa ushicilelo oluhle kwaye lulula ngebhedi yoshicilelo oluqhawukayo.Akukho mfuneko ye-scraper.

[Ukutshintsha koMda woMda woMbane]

Ukusebenzisa umyinge wokutshintsha kwe-optoelectrical yokubeka indawo.Uvakalelo oluphezulu, oluthembekileyo kwaye luhlala ixesha elide.

4
  • Ngaphambili:
  • Okulandelayo:
    • Iteknoloji FDM/FFF
    Yakha Umthamo 300*300*400mm
    Ukuchaneka koShicilelo 0.1mm
    Ukuchaneka X/Y: 0.05mm, Z: 0.1mm
    Isantya Soshicilelo Ukuya kuthi ga kwi-150mm/s
    Nozzle Travel Speed Ukuya kuthi ga kwi-200mm/s
    Izixhobo ezixhaswayo PLA, ABS, PETG
    I-Filament Diameter 1.75mm
    Nozzle Diameter 0.4mm
    Nozzle Ubushushu Ukuya kuthi ga kwi-260℃
    Ubushushu bebhedi eshushu Ukuya kuthi ga kwi-100℃
    Uqhagamshelwano USB, Micro SD Card
    Bonisa 4.3”Isikrini esigcweleyo soMbala weTouch
    Ulwimi IsiNgesi / isiTshayina
    IiSoftware zoShicilelo Cura, Rapetier-Host, Yenza lula i-3D
    Iifomathi zeFayile yokuNgena STL, OBJ, JPG
    Iifomathi zeFayile eziphumayo GCODE, GCO
    Inkxaso OS Windows / Mac
    Ungeniso lokuSebenza 100-120 VAC / 220-240 VAC 360W
    Ubunzima bemveliso 22 kg
    Imilinganiselo yeMveliso 545*575*645 mm
    Ubunzima bokuthutha 16.8kg
    Ipakethe Imilinganiselo 630*605*230 mm

    Q1.Ithini isayizi yoshicilelo lomatshini?

    A1: Ubude / Ububanzi / Ukuphakama: 300 * 300 * 400mm. 

    Q2.Ngaba lo matshini uyakuxhasa ushicilelo olunemibala emibini?

    A2: Yisakhiwo sombhobho omnye, ngoko ke ayikuxhasi ushicilelo olunemibala emibini.

    Q3.Yintoni ukuchaneka koshicilelo lomatshini?

    I-A3: Ukucwangciswa okusemgangathweni ngu-0.4mm umlomo wombhobho, onokuxhasa uluhlu oluchanekileyo lwe-0.1-0.4mm.

    Q4.Ngaba umatshini uyakuxhasa ukusebenzisa i-filament eyi-3mm?

    I-A4: Ixhasa kuphela i-1.75mm ububanzi beefayili.

    Q5.Yeyiphi imicu exhasa ukuprinta kumatshini?

    I-A5: Ixhasa ukushicilelwa kwe-PLA, i-PETG, i-ABS, i-TPU kunye nezinye iifayili zomgca.

    Q6.Ngaba umatshini uyakuxhasa ukuqhagamshela kwikhompyuter yoshicilelo?

    I-A6: Ixhasa i-intanethi kunye ne-intanethi ukuprinta, kodwa kuyacetyiswa ukuba uprinte ngaphandle kwe-intanethi okuya kuba ngcono.

    Q7.Ukuba i-voltage yendawo kuphela i-110V, ngaba iyaxhasa?

    A7: Kukho iigiya ze-115V kunye ne-230V kunikezelo lwamandla lohlengahlengiso, DC: 24V

    Q8.Kunjani ukusetyenziswa kwamandla omatshini?

    I-A8: Amandla alinganisiweyo jikelele omatshini yi-350W, kwaye ukusetyenziswa kwamandla kuphantsi.

    Q9.Leliphi elona qondo lobushushu lombhobho liphezulu?

    A9: 250 degrees Celsius. 

    Q10.Buthini ubushushu obuphezulu behotbed?

    A10: 100 degrees Celsius.

    Q11.Ngaba umatshini unomsebenzi wokucinywa kombane oqhubekayo?

    A11: Ewe, kunjalo.

    Q12.Ngaba umatshini unomsebenzi wokubona ukwaphuka kwezinto?

    A12: Ewe, kunjalo.

    Q13.Ngaba kukho isikrufu esiphindwe kabini se-Z-axis somatshini?

    A13: Hayi, sisakhiwo esinye isikhonkwane.

    Q14.Ngaba kukho naziphi na iimfuno zenkqubo yekhompyuter?

    A14: Okwangoku, ingasetyenziswa Windows XP/Vista/7/10/MAC/Linux.

    Q15.Sithini isantya soshicilelo somatshini?

    I-A15: Isantya esiphezulu sokushicilela umatshini ngu-50-60mm / s.

    BestGee T300S Pro Incwadi Yomsebenzisi

    I-Cura 4.6 Tutorial - BestGee T300S - V1.1

    • Bhala umyalezo wakho apha kwaye uwuthumele kuthi

    Iindidi zeemveliso

    Cofa u-enter ukukhangela okanye i-ESC ukuvala