KAYANA

TPU 3D Filament

Takaitaccen Bayani:

Siffofin:

1. [Soft Filaments of High Elasticity] TPU M Filament ne mai thermoplastic polyurethane (TPU) tushen filament musamman injiniya don aiki a kan mafi tebur 3D firintocinku.Yana da taurin bakin teku na 95A kuma yana iya shimfiɗa sau 3 fiye da tsayinsa na asali.
2. [Free Build Surface] Kyakkyawan mannen gado, ƙananan warp da ƙananan wari, suna sa waɗannan filaments na 3D masu sauƙi don bugawa.Yana iya haɗawa da gadon bugawa da kyau ba tare da dumama ba.
3. [Clog-Free & Bubble-Free] TPU filament 1.75 Vacuumed An rufe shi yana ba ku ƙwarewar bugu mai santsi da kwanciyar hankali tare da waɗannan sake cikawa.Babu Kyauta kuma ba za a yi alƙawarin ba.
4. [Wide Compatibility] Mai jituwa tare da duk firintocin FDM akan kasuwa waɗanda ke karɓar filament na 1.75 mm;Ciki har da Prusa i3, Monoprice MakerSelect, SainSmart xCreality, da sauran firintocin RepRap.
5. [Dimensional Accuracy & Consistency] ci-gaba CCD diamita aunawa da kai-adaptive kula da tsarin a cikin masana'antu garanti wadannan taushi TPU filaments zama m tolerances, diamita 1.75mm, girma daidaito + / - .02 mm ba tare da wani karin gishiri;1 kilogiram spool (2.2lbs)

Aika mana imel

Cikakken Bayani

BAYANI

1. Muhalli mai kyau da mara guba;

2. Launi mai haske;

3. Ƙananan raguwa;

4. Kyakkyawan tauri, ba sauƙin zama mai gasa ba, mai kyau acid da juriya na alkali, kyakkyawan ƙarfi, juriya na yanayi, mannewa mai kyau;

5.Good girma kwanciyar hankali, babu fasa da warping;

6.High nuna gaskiya, mai kyau sheki

Ya dace da duk samfuran firintocin FDM 3D.Ya dace da bugu kowane nau'in samfuran da aka saba amfani da su, sana'a, sassan injiniya, kalmomin talla, da sauransu.

[High Transparency]

Buga yana da kyakkyawan rubutu tare da kyakyawan yanayi mai kyau da watsa haske mai ƙarfi.

[Sauƙi don Bugawa da Ƙarfi mafi girma]

PETG yana da ƙarfi mafi girma da ƙarfin tasiri idan aka kwatanta da PLA.Ya haɗu da kyawawan kayan aikin injiniya na ABS da kyakkyawan aikin bugawa na PLA wanda ke da sauƙin bugawa ba tare da warping ba.

[Kyakkyawan Juriya na Yanayi]

Kyakkyawan juriya na yanayi da juriya na sinadarai, wanda ke jure wa nau'ikan sinadarai da abubuwan tsaftacewa na gama gari.

[Mafi Girma]

Raw abu na high tsarki.ROHS mai yarda.Babu ƙazanta ko kayan da aka sake fa'ida.Kunna barga da santsin extrusion ba tare da matsi na bututun ƙarfe ba.

[Ba Sauƙin Karyewa]

Kyakkyawar tauri, ƙarfin ɗaure da ruwa.Ƙuntataccen kulawar inganci ga kowane tsari.100% babu kumfa.Kyakkyawan tasirin bugawa ba tare da warping ba.

[Babban Madaidaicin Diamita]

Ana sarrafa haƙurin diamita na filament tsakanin ± 0.02mm.Barga har ma extrusion ga high bugu daidaito da kuma ingancin.

Na baya: PETG 3D Filament

Na gaba: PCL 3D Filament

Diamita	1.75 ± 0.02mm
Zazzabi na bugawa	205-230 ℃
Zafin Kwanciya	50-80 ℃
Yawan yawa	1.43 ± 0.05 g/cm³
Zafin Rage Zafi	/
Narkar da Ruwan Ruwa	5-8 g/min (190℃ 2.16kg)
Ƙarfin Ƙarfi	/
Karfin Lankwasa	/
Tsawaitawa a Break	≥ 600%
NW	1.0 kg
GW	1.3 kg
Tsawon	≈ 290m