KAYANA

PCL 3D Filament

Takaitaccen Bayani:

Siffofin:
1. [SAFER & HEALTHIER MATERIAL]: Idan aka kwatanta da PLA, PCL filament tare da ƙananan zafin jiki na narkewa na 70℃wanda ke kawar da haɗarin kona hannaye.Bayan haka, PCL filament refills an samu 100% daga albarkatun shuka da za'a iya sabuntawa wanda ba mai guba bane, mara wari, mara ban haushi kuma mai yuwuwa.
2. [ULTRA-SMOOTH] PCL filament ga 3D alkalami tare da Low temp sakewa da fasaha da kuma high-daidaici PCL filament 1.75mm diamita tabbatar da 3D zane sosai smoothly ba tare da m sharan gona ko kumfa, babu clogging.
3. [KYAUTA MAI KYAU] Babban inganci da Babban Madaidaicin 3D Pen ya cika tare da 1.75mm, daidaiton girman + / - .05 mm ba tare da ƙari ba.
4. [ UNIVERSAL COMPATIBILITY ] Mai dacewa da mafi yawan 3D Pens/3D Printer akan kasuwa.
5. [Mai kyau ga yara su ƙirƙira] Filashin Printer kyauta ce mai kyau ga yara akan Kirsimeti, ranar haihuwa, da bukukuwa;Shirya isassun kayan aiki don juya sabon ra'ayi zuwa gaskiya.

Aika mana imel

Cikakken Bayani

BAYANI

1. Muhalli da abokantaka da marasa guba, kayan da ba za a iya lalata su ba;

2. Launi mai haske;

3. Ƙananan raguwa;

4. Ƙananan narkewa;

5. Kyakkyawan sassauci;

6. Tare da aikin gyare-gyare na musamman, gyaran gyare-gyare mai maimaitawa.

Ya dace da zanen alƙalami na 3D da yin ƙirar DIY.

[Ƙarancin Zazzabi]

The bugu zafin jiki ne kawai 70-100 ℃.Filament yayi sanyi da sauri bayan fitar dashi.Ana iya amfani da alkalami na 3D na yara, wanda ba shi da lafiya kuma ba zafi ba.

[Amincin Muhalli]

Abun da ke da alaƙa da muhalli.Amintacce, mara wari kuma mai lalacewa.Babu illa ga lafiya.

[Ba Sauƙin Karyewa]

Kyakkyawar tauri, ƙarfin ɗaure da ruwa.Ƙuntataccen kulawar inganci ga kowane tsari.100% babu kumfa.Kyakkyawan tasirin bugawa ba tare da warping ba.

[Babban Madaidaicin Diamita]

Ana sarrafa haƙurin diamita na filament tsakanin ± 0.02mm.Barga har ma extrusion ga high bugu daidaito da kuma ingancin.

Na baya: TPU 3D Filament

Na gaba: Filament na Silk 3D na PLA

Diamita	1.75 ± 0.2mm
Zazzabi na bugawa	70-100 ℃
Zafin Kwanciya	Babu buƙatar dumama
Yawan yawa	1.16 ± 0.05 g/cm³
Zafin Rage Zafi	40-50 ℃
Narkar da Ruwan Ruwa	3-5 g/min (100 ℃ 2.16kg)
Ƙarfin Ƙarfi	≥ 15 Mpa
Karfin Lankwasa	≥ 10 Mpa
Tsawaitawa a Break	≥ 560%
NW	1.0 kg
GW	1.3 kg
Tsawon	≈ 360m