Maker Guide

  • LaserCube APP Downloads

    LaserCube APP Downloads

      Precision in order to improve the speed of sending, we research, on the basis of the original indigenous tronhoo2code coding technology to send laser engraving machine data coding and decoding process, on the premise of reducing linear interference transmission speed and stability, tro...
    Read more
  • Grinding Filament

    Grinding Filament

    What’s the Issue? Grinding or Stripped filament can happen at any point of the printing, and with any filament. It may cause printing stops, printing nothing in mid-print or other issues. Possible Causes ∙ Not Feeding ∙ Tangled Filament ∙ Nozzle Jammed ∙ High Retract Speed ∙ Printing Too Fast ∙ E...
    Read more
  • Snapped Filament

    Snapped Filament

    What’s the Issue? Snapping can happen at the beginning of the printing or in the middle. It will cause printing stops, printing nothing in mid-print or other issues. Possible Causes ∙ Old or Cheap Filament ∙ Extruder Tension ∙ Nozzle Jammed   Troubleshooting Tips Old or Cheap Filament Gener...
    Read more
  • Nozzle Jammed

    Nozzle Jammed

    What’s the Issue? Filament has been fed to nozzle and the extruder is working, but no plastic comes out of the nozzle. Reracting and refeeding doesn’t work. Then it is likely that the nozzle is jammed.   Possible Causes ∙  Nozzle Temperature ∙  Old Filament Left Inside ∙  Nozzle Not Clean   Trou...
    Read more